A range of boring
cutters to suit the popular sizes of concealed cabinet
hinges and KD fittings. All sizes have a centre point
and two scoring cutters and produce a clean flat bottomed
hole in all timbers and particle boards. Cutters up to
26mm diameter may be used at speeds up to 25,000 rpm,
however the larger cutters should ideally be used at speeds
below 10,000 rpm in a pillar drill or similar, although
a variable speed routing machine is also suitable. In
addition to hinge sinking, these cutters are also ideal
for any operation requiring a clean bored hole with a
flat bottom.
The 30410010 has a 10mm shank, with flat and height adjustment
screw, for use in multi-boring machines etc. |
 |
|
| |
Art
No. |
A |
B |
C |
D |
30410001 |
15.0mm |
26mm |
8mm |
36mm |
30410002 |
20.0mm |
26mm |
8mm |
36mm |
30410003 |
20.0mm |
26mm |
3/8" |
36mm |
30410004 |
22.0mm |
26mm |
3/8" |
36mm |
30410005 |
25.0mm |
26mm |
3/8" |
36mm |
30410006 |
26.0mm |
26mm |
3/8" |
36mm |
30410007 |
30.0mm |
28mm |
3/8" |
36mm |
30410008 |
35.0mm |
28mm |
8mm |
36mm |
30410009 |
35.0mm |
28mm |
3/8" |
36mm |
30410010 |
35.0mm |
30mm |
10mm |
26mm |
30410011 |
35.0mm |
28mm |
1/2" |
36mm |
30410012 |
40.0mm |
28mm |
1/2" |
36mm |
30410013 |
50.8mm |
28mm |
3/8" |
36mm |
|
 |
|
| |
|
