Home        About Us        Contact Us       Exhibition        Site Map        
-
New Products
-
Hole Saws
-
Diamond Tools
-
Metal Cutting Tools
-
Wood Cutting Tools
-
Masonry Cutting Tools
-
Cutting & Grinding Disc
-
Measure Tools
-
Accessories for Tools
 
OSTAR Tools --> Products --> Cutting for metal --> Damaged Screw Remover
 
Damaged Screw Remover
                          
Features and Benefits:
High quality tool steel;
1/4" Quick bit compatible;
Remove damaged screws fast AND easy;
Time saving;
Reusable time and time again;
Warranty
Save money on unnecessary repair;
No drilling required;
Consumer friendly;
Chemical and gunk free;
Operating Instructions:
1. Chuck it into a standard 3/8 inch variable speed power drill, set for reverse mode. For faster results use a standard 1/4 quick bit holder (not provided).
2. Place the tip of it onto the center of the damaged fastener. Apply firm pressure in the direction of the damaged screw or fastener. Power the drill to the lowest level possible. Maintain a firm pressure towards the screw or fastener. The screw will begin to turn out.
 
3pcs Screw Remover Set
A wood screw remover set for use with a reversible drill. Comes with three sizes for most popular screw sizes.
Removes damaged and rounded off screw heads and can be used with indented type screws e.g. Phillips, Slotted, Hex, Torx, Tri-wing, Pozi, Frearson and most tamper resistant screws
Push down to drill into the screw and turns the screw out.
Reusable, up to fifty times.
Art No.: 50704001
No.1 for Screw #6 to #8
No.2 for Screw #8 to #10
No.3 for Screw #10 to #14
-
120sets/CTN, 11/12kgs, 46x28x24cm
Art No.: 50704002
No.1 for Screw #6 to #8
No.2 for Screw #8 to #10
No.3 for Screw #10 to #14
8mm HSS Saw Drills
100sets/CTN, 10/11kgs, 39x29x13cm
Art No.: 50704003
No.1 for Screw #6 to #8
No.2 for Screw #8 to #10
No.3 for Screw #10 to #14
8mm HSS Saw Drills
40sets/CTN, 5/6kgs, 39x39x22cm
     
Art No.: 50704004
No.0 for Screw #6 to #8
No.1 for Screw #6 to #8
No.2 for Screw #8 to #10
No.3 for Screw #10 to #14
No.4 for Screw #10 to #14
   
 
©Copyright (2001-2009) - OSTAR TOOLS CO., LIMITED - All Rights Reserved